T-Shirt Project

How was everyone’s weekend?  I had a pretty busy weekend, but I did have a little bit of time to help my friend, Stacy, make a T-shirt for a friend’s birthday.  If the caption on the shirt doesn’t make any sense, just ignore it and imagine your own beautiful design on it, instead.  Apparently, it’s some sort of an inside joke.

I recently discovered the secret double life of freezer paper (you can trace designs onto it and iron it onto fabric), so when Stacy asked for my help with this project (that’s her, pictured above), I was excited to see it in action.

First, we ran to the store for the supplies.  Well, more than one store, because all we were able to find was this enormous box of freezer paper.  We asked several employees if they knew where we could find a smaller box, and they all looked at us like, “Do I look like the type of person who knows a lot about freezer paper?”  At last, we settled on the large box, because we weren’t sure how long the shirt itself was going to take, and we wanted to get started on it.  That, and we still hadn’t eaten lunch.

Here are the supplies for this project:

We choose a black shirt, because apparently that’s Stacy’s friend’s favorite color.  Hmm.  Because the T-shirt was black, we decided to go with white “dimensional” fabric paint, which I assume is the same as the puff fabric paint.  Since we wanted to avoid the “puffy” look, we bought an economy pack of children’s paintbrushes to brush it on.

First, we opened a word processing document and picked a font that would be substantial enough to cut out and make into a stencil.  Then, we printed it and cut around each word.

Since we used size 225 font, it only printed three letters per line, so Stacy took the time to line up the letters using a ruler to make sure that each word was straight, and then taped them together using masking tape.  We then put masking tape on the back, with the sticky side up so that we could tape it to the plastic side of the freezer paper.

After the lettering was taped to the back of the freezer paper, we began to trace the letters onto the paper side of the freezer paper using a Sharpie marker.

When the letters were all traced, we used an orange craft knife that I found in my basement to cut out the letters.  We almost threw out all of the insides, but then we realized that we were going to need the centers of some of the letters.  For example, B, A, R, D, etc., all have inner centers that need to be ironed onto the shirt, as well, to complete the stencil.

Here is what part of the stencil looked like once it was complete:

Once all of the letters were cut out, we ironed the freezer paper stencil onto the shirt.  (Please excuse the beach towel in the background.  I did not want paint getting on my carpet.)

We ironed the main part of the stencil on first, and then went back in and added the centers of the letters.  Here is the finished stencil, ironed on the shirt:

Now, it was time to paint.  As I mentioned earlier, we had chosen white paint, because we wanted a sharp contrast against the black shirt.  This is the paint we bought:

It seemed to spread pretty easily, but was rather thin.  Stacy ended up having to do four coats.

When all four coats were applied, we decided to remove the stencil before the paint dried completely, to avoid messing up the paint once it was dry.

In the future, we would probably let it dry for a little longer first before removing the freezer paper, but it turned out just fine.  Here is the finished product:

Not bad for our first attempt.  Now that we’ve done this and still have several yards (miles??) of freezer paper, we’re looking for some more projects to do.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s